Order Products : sales@su-jiao.com
MACOMASS TPE MM-TPE V 3140
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | MACOMASS Verkaufs AG |
| Trademark: | MACOMASS TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RPL1km_MACOMASS-TPE-MM-TPE-V-3140.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MACOMASS TPE MM-TPE V 3140 is a Thermoplastic Elastomer (TPE) material. It is available in Europe for injection molding. Important attributes of MACOMASS TPE MM-TPE V 3140 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 to 0.990 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec) | 67 to 73 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 5.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | > 300 | % | ISO 37 |
| Tear Strength | > 10 | kN/m | ISO 34-1 |
| Compression Set | < 55 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 160 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VECTRA® A435 | Celanese Corporation | LCP | VECTRA® |
| Vacuum Cast V-855 A/B | BJB Enterprises, Inc. | PUR, Unspecified | Vacuum Cast |
| Elastron® G G300.A57.B | Elastron USA, Inc. | SEBS | Elastron® G |
| OXNILON 66 43GF | Oxford Polymers | Nylon 66 | OXNILON 66 |
| Telcar® TL-2934N | Teknor Apex Company | TPE | Telcar® |
