Order Products : sales@su-jiao.com

ESENTTIA 20C65NA

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RPEogd_ESENTTIA-20C65NA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Characteristics: High melt flow rate control reologhy Impact block copolymer polypropylene; very high impact/stiffness balance; tough weld line; with nucleant and antistatic additives. Recommended for: Injection molding of rigid containers as pails, buckets, housewares, industrial applications; compounding for the automotive industry; TPO.

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Block Copolymer Controlled Rheology Food Contact Acceptable High Flow High Rigidity Nucleated
Uses	Automotive Applications Compounding Containers Household Goods Industrial Applications Pails
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Compounding Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	19	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	20.0	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	9.0	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1000	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	530	J/m	ASTM D256A
Gardner Impact ⁵(-30°C, 3.20 mm, Injection Molded)	30.5	J	ASTM D5420

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min
5 .	Method A

Resin Grade	Manufacturer	Category	Trademark
Staramide AG5K	Eurostar Engineering Plastics	Nylon 66	Staramide
Generic PPA - Carbon Fiber	Generic	PPA	Generic
INTEX® 131	Versalis S.p.A.	SBR, Emulsion	INTEX®
Integra™ PC 5020 F1	PolySource, LLC	PC	Integra™ PC
Petrothene® LP500210	LyondellBasell Industries	HDPE	Petrothene®