Order Products : sales@su-jiao.com
Dapol® D500
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Fudow Co., Ltd. |
| Trademark: | Dapol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RO4rB8_DapolD500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Examples of applications
|
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.60 - 1.70 | g/cm³ | JIS K6911 |
| Molding Shrinkage | JIS K6911 | ||
| -- 1 | 0.50 - 0.80 | % | JIS K6911 |
| -- 2 | 0.40 - 0.70 | % | JIS K6911 |
| Water absorption rate- boiling | 0.15 - 0.25 | % | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 170 - 180 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Insulation Resistance | JIS K6911 | ||
| after boiling | 1.0E+13 - 1.0E+14 | ohms | JIS K6911 |
| at ordinary state | 1.0E+14 - 1.0E+15 | ohms | JIS K6911 |
| surface | 1.0E+8 - 1.0E+10 | ohms | JIS K6911 |
| volume | 1.0E+9 - 1.0E+10 | ohms | JIS K6911 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Shrinkage | 0.050 - 0.10 | % | JIS K6918 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | JIS K6911 | ||
| Molding | 69.0 - 98.0 | MPa | JIS K6911 |
| Injection Molding | 98.0 - 147 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | JIS K6911 | ||
| Molding | 2.9 - 4.9 | kJ/m² | JIS K6911 |
| Injection Molding | 3.4 - 5.4 | kJ/m² | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 12 - 16 | kV/mm | JIS K6911 |
| Dielectric Constant | JIS K6911 | ||
| -- 3 | 4.40 - 4.70 | JIS K6911 | |
| -- | 4.40 - 4.60 | JIS K6911 | |
| Dissipation Factor | JIS K6911 | ||
| -- | 0.012 - 0.015 | JIS K6911 | |
| -- 4 | 0.012 - 0.017 | JIS K6911 | |
| Arc Resistance | > 120 | sec | JIS K6911 |
| Comparative Tracking Index | > 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.0 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection Molding |
| 2 . | Compression Molding |
| 3 . | after immersion in water |
| 4 . | after immersion in water |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 211 HS | RTP Company | Nylon 66 | RTP |
| THERMOLAST® K TF8THT (Series: FC/ht) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Bayflex® XGT-80 (15% Glass) | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| Epocast 1633 A/B | Huntsman Advanced Materials | Epoxy | Epocast |
| Kemcor HD 2468 | Qenos Pty Ltd | HDPE Copolymer | Kemcor |
