Order Products : sales@su-jiao.com
Petrothene® GA616050
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RLvsaU_Petrothene-GA616050.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Petrothene GA616050 is a linear low density polyethylene resin selected by customers for dry blending with low density polyethylene coating resins to produce linear low extrusion coatings. |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 56 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 11.7 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 870 | % | ASTM D638 |
| Flexural Modulus 3 | 345 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Specific recommendations for processing GA616050 can only be made when the processing conditions, equipment and end use are known. The maximum recommended melt temperature for GA616050 blended with LDPE is 625°F. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 329 | °C |
| Note Message | |
|---|---|
| 1 . | Type 4 |
| 2 . | Type 4 |
| 3 . | Type 4 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 MS Natural | RTP Company | Nylon 66 | RTP |
| RTP 4005 TFE 15 HB | RTP Company | PPA | RTP |
| Titalon® 1350GF | Titan Plastics Compounds Co., Ltd. | Nylon 6 | Titalon® |
| INEOS PP H07N-00 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| PENTAMID L GV25 H black | PENTAC Polymer GmbH | Nylon 12 | PENTAMID L |
