Order Products : sales@su-jiao.com
CERTENE™ LLI-3525
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RGlg2U_CERTENE-LLI-3525.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLI-3525 is a certified prime grade designed for INJECTION MOLDING applications requiring excellent impact strength and environmental stress crack resistance. LLI-3525 features excellent low temperature impact strength, good processability and rigidity. LLI-3525 applications include general purpose injection molding applications. LLI-3525 recommended processing temperature is 180 to 220°C. with mold @ 20 to 40°C.. LLI-3525 complies with FDA regulation 21CFR 177.1520 (c) 3.1(a) and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | 10.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 70 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 380 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact (-40°C) | 189 | J | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 45.0 | °C | ASTM D648 |
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Notched bent strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro-fax RF6140K | LyondellBasell Industries | PP Homopolymer | Pro-fax |
| S&E Wire & Cable GA-1042LF | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Wire & Cable |
| VICOTE® F816Blk | Victrex plc | PEEK | VICOTE® |
| Zytel® RS LC4601 NC010 | DuPont Performance Polymers | Nylon, Unspecified | Zytel® RS |
| Crastin® S650FR BK851 | DuPont Performance Polymers | PBT | Crastin® |
