Order Products : sales@su-jiao.com
Surlyn® 1601-2LM
| Category: | Ionomer , Ionomer |
| Manufacturer: | DuPont Packaging & Industrial Polymers |
| Trademark: | Surlyn® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RG4OnQ_Surlyn-1601-2LM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Surlyn® 1601-2LM is available for use in conventional blown, cast film, and sheet extrusion equipment. It is also used in coextrusion equipment designed to process polyethylene and ethylene copolymer type resins. Lower moisture specification for higher temperature processing |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.3 | g/10 min | ASTM D1238, ISO 1133 |
| Ion Type | Sodium |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Freezing Point | |||
| -- | 68 | °C | ISO 3146 |
| -- | 68 | °C | ASTM D3417 |
| Vicat Softening Temperature | 74.0 | °C | ASTM D1525, ISO 306 |
| Peak Melting Temperature | 98.0 | °C | ASTM D3417, ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 - 260 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 135 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Cylinder Zone 4 Temp. | 185 | °C | |
| Cylinder Zone 5 Temp. | 185 | °C | |
| Adapter Temperature | 185 | °C | |
| Melt Temperature | 160 - 260 | °C | |
| Die Temperature | 185 | °C |
| Extrusion instructions |
|---|
| The above processing values are for blown film.Cast film parameters: Feed Zone: 160°C Second Zone: 210°C Third Zone: 235°C Fourth Zone: 235°C Fifth Zone: 235°C Adapter Zone: 235°C Die Zone: 235°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ PW2300 resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
| UNITIKA Nylon 66 E-RUNG60 | UNITIKA Plastics Division | Nylon 66 | UNITIKA Nylon 66 |
| Next Nylon 6 Prime Series NM30-01BK | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Prime Series |
| CERTENE™ LLBF-0822B | Muehlstein | LLDPE | CERTENE™ |
| Chemical Resources LLD140933 | Chemical Resources, Inc. | LLDPE | Chemical Resources |
