Tecnoflon® FOR 537

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RBP8oV_Tecnoflon-FOR-537.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 537 is a low viscosity cure incorporated fluoroelastomer copolymer. This grade is especially suited for injection molding of O-rings and sealing components which must meet demanding specifications. Tecnoflon® FOR 537 contains a proprietary cure system and a special processing aid providing superior processability for fast cycles and scorch safety. It has been particularly designed to offer improved characteristics such as flow, mold release, scorch safety and faster cycles at higher molding temperatures. Some of the basic properties of Tecnoflon® FOR 537 are: Best for high duro and non black compounds O-ring curative level Low viscosity Improved scorch safety Easiest mold release, no mold fouling TECNOFLON® FOR 537 can be used for injection and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 537 is a low viscosity cure incorporated fluoroelastomer copolymer. This grade is especially suited for injection molding of O-rings and sealing components which must meet demanding specifications. Tecnoflon® FOR 537 contains a proprietary cure system and a special processing aid providing superior processability for fast cycles and scorch safety. It has been particularly designed to offer improved characteristics such as flow, mold release, scorch safety and faster cycles at higher molding temperatures.

Some of the basic properties of Tecnoflon® FOR 537 are:

Best for high duro and non black compounds

O-ring curative level

Low viscosity

Improved scorch safety

Easiest mold release, no mold fouling

TECNOFLON® FOR 537 can be used for injection and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Additive	Processing Aid
Features	Copolymer Fast Molding Cycle Good Flow Good Mold Release Good Processability Low Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	20	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Monprene® CP-32063G	Teknor Apex Company	TPE	Monprene®
TYNEL® U4291	Tyne Plastics LLC.	PEI	TYNEL®
ALCOM® PC + AWL 750/15.1 WT1378-04LB	ALBIS PLASTIC GmbH	PC+ABS	ALCOM® PC + AWL
Chemlon® 100	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
Karina BLACK PVC COMPOUND 75850-48/1-D-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina