Order Products : sales@su-jiao.com
KYDEX® 430
| Category: | ABS+PVC , Acrylonitrile Butadiene Styrene + PVC |
| Manufacturer: | SEKISUI Polymer Innovations, LLC |
| Trademark: | KYDEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RBNmE8_KYDEX-430.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KYDEX ® 430 is a proprietary ABS/PVC thermoplastic sheet that offers superior thermoformability, rigidity, breakage resistance, chemical resistance and fire retardancy. KYDEX ® 430 is available in a wide range of standard and custom colors, textures, and sheet sizes. It is Underwriters Laboratories, Inc ® recognized for UL std 94 V-0, 5V and pass the ball pressure test per IEC 60695-10-2. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Molding Shrinkage | 0.50 to 0.70 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.18 mm) | 50.9 | MPa | ASTM D638 |
| Flexural Modulus (3.18 mm) | 2390 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 74.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (22°C, 3.18 mm) | 180 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed, 3.18 mm | 73.3 | °C | |
| 1.8 MPa, Annealed, 3.18 mm 1 | 82.7 | °C | |
| Ball Pressure Test (3.18 mm) | Pass | IEC 60695-10-2 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 2(1.00 mm) | V-0 5V | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Thermoforming Molding Temperature (> 1.00 mm) | 163 to 204 | °C |
| Note Message | |
|---|---|
| 1 . | Annealed at 65.5°C (150°F) for 8 hours and cooled slowly |
| 2 . | Underwriters Laboratories, Inc File #E115252 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 3382 | RTP Company | PVDF | RTP |
| Dynaflex™ G2711C | PolyOne Corporation | TPE | Dynaflex™ |
| EPLAMID 6 MFT 20 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
| Plenco 02308 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| SIBUR Synthetic Rubber SBR-1706 Grade C | SIBUR | SBR, Emulsion | SIBUR Synthetic Rubber |
