RTP 300 TFE 10 SI 2

Category: PC , Polycarbonate
Manufacturer: RTP Company
Trademark: RTP
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: RAgvGG_RTP-300-TFE-10-SI-2.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
PTFE Lubricated - Silicone Lubricated
General Information
Additive
  • PTFE lubricant (10%)
  • Silicone lubricant (2%)
Features
  • Lubrication
RoHS Compliance
  • Contact manufacturer
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.24g/cm³ASTM D792
Molding Shrinkage - Flow (3.20 mm)0.50 - 1.0%ASTM D955
Moisture Content 0.020%
MechanicalNominal ValueUnitTest Method
Tensile Modulus 2070MPaASTM D638
Tensile Strength 51.7MPaASTM D638
Tensile Elongation (Yield)> 10%ASTM D638
Flexural Modulus 2070MPaASTM D790
Flexural Strength 79.3MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (3.20 mm)400J/mASTM D256
Unnotched Izod Impact (3.20 mm)No BreakASTM D4812
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)129°CASTM D648
ElectricalNominal ValueUnitTest Method
Volume Resistivity 1.0E+14 - 1.0E+16ohms·cmASTM D257
FlammabilityNominal ValueUnitTest Method
Flame Rating (1.50 mm, ** Values per RTP Company testing.)HBUL 94
InjectionNominal ValueUnit
Drying Temperature 121°C
Drying Time 4.0hr
Dew Point -28.9°C
Processing (Melt) Temp 288 - 316°C
Mold Temperature 82.2 - 121°C
Injection Pressure 68.9 - 103MPa
Injection instructions
Desiccant Type Dryer Required.
Resin Grade Manufacturer Category Trademark
RTP EMI 961 RTP Company PSU RTP
NEFTEKHIM PS 430 Nizhnekamskneftekhim Inc. PS (GPPS) NEFTEKHIM PS
ALCUDIA® EBA PA-24004 REPSOL EBA ALCUDIA® EBA
Grilamid® XE 4192 black 9992 EMS-GRIVORY Nylon 610 Grilamid®
Moplen HP562T LyondellBasell Industries PP Homopolymer Moplen