Order Products : sales@su-jiao.com
KRATON® D1124 B
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RAfMhf_KRATON-D1124-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1124 B is a clear, branched triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from South America in the physical form identified below.
Kraton D1124 B is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 4.0 | g/10 min | ISO 1133 |
| Solution Viscosity 1 | 160 to 560 | mPa·s | Internal Method |
| Bound Styrene | 28.0 to 32.0 | % | Internal Method |
| Antioxidant Additive | 0.080 to 0.21 | % | Internal Method |
| Ash Content - BT | 0.2 to 0.5 | wt% | Internal Method |
| Polystyrene Content | 28 to 32 | % | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Diblock Content | 30 | % | |
| Styrene/Rubber ratio | 30/70 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec, Compression Molded) | 54 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.80 | MPa | ISO 37 |
| Tensile Stress (Yield) | 14.5 | MPa | ISO 37 |
| Tensile Elongation (Break) | 1100 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | 25%w toluene solution at 25°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8983-70 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Braskem PP PCD 0140 | Braskem | PP Impact Copolymer | Braskem PP |
| KEBAFLEX® S 45 A.01 | BARLOG plastics GmbH | TES | KEBAFLEX® |
| Magnobond 6021-1 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| Grilamid® L XE 10987 black 9225 | EMS-GRIVORY | Nylon 12 | Grilamid® |
