MFE® -36

Category: Vinyl Ester , Vinyl Ester
Manufacturer: Huachang Polymer Co., Ltd.
Trademark: MFE®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: R8YWd5_MFE--36.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
MFE-36 is based on bisphenol-A epoxy vinyl ester resin, modified by methacrylic acid. It has excellent flexibility.

PROPERTY
  • Excellent process performance and wet-out with fibers.
  • Excellent corrosion-resistance, especially to inorganic acid, alkali, salt, etc.
  • Excellent mechanical properties.
  • High tensile elongation.
  • Low peak exotherm, low shrinkage.

APPLICATION
  • Can be used in various processes, such as hand lay-up, pultrusion, spray-up, filament winding, etc
  • Various FRP products.
  • Corrosion resistant flooring, sealing material, FRP layer on the surface of metal and concrete structure.
General Information
Features
  • Acid Resistant
  • Alkali Resistant
  • Good Corrosion Resistance
  • Good Flexibility
  • High Elongation
  • Low Exotherm
  • Low Shrinkage
  • Rapid Wetting
  • Salt Water/Spray Resistant
Uses
  • Flooring Maintenance/Repair
  • Protective Coatings
  • Sealants
Appearance
  • Yellow
Processing Method
  • Filament Winding
  • Hand Lay-up
  • Pultrusion
  • Spraying
PhysicalNominal ValueUnitTest Method
Acid Value 7.00 to 13.00mg KOH/g
Solids Content 51 to 59%
ThermalNominal ValueUnitTest Method
Thermal Stability (80°C)> 1day
ThermosetNominal ValueUnit
Gel Time (25°C)15.0 to 25.0min
Fill AnalysisNominal ValueUnit
Brookfield Viscosity 1(25°C)400 to 600mPa·s
HardnessNominal ValueUnitTest Method
Barcol Hardness 40ASTM D2583
MechanicalNominal ValueUnitTest Method
Tensile Modulus 3400MPaASTM D638
Tensile Strength 85.0MPaASTM D638
Tensile Elongation (Break)7.0%ASTM D638
Flexural Modulus 3200MPaASTM D790
Flexural Strength 150MPaASTM D790
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)105°CASTM D648
Note Message
1 .Brookfield #63@60rpm
Resin Grade Manufacturer Category Trademark
Ultramid® B3S BASF Corporation Nylon 6 Ultramid®
Braskem PP TI6550WV Braskem America Inc. PP Impact Copolymer Braskem PP
Comco PA 6 extruded Comco-Plastic GmbH Nylon 6 Comco
Hanwha Total PP FB76S HANWHA TOTAL PETROCHEMICALS Co., Ltd. PP, Unspecified Hanwha Total PP
Hostacom TKC 156N C12334 LyondellBasell Industries PP Copolymer Hostacom