Order Products : sales@su-jiao.com

Baydur® 742 IBS (37 pcf)

Category:	PUR-MDI , Polyurethane (MDI)
Manufacturer:	Covestro - PUR
Trademark:	Baydur®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	R6dplG_Baydur-742-IBS-37-pcf-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Baydur 742 IBS is a semirigid polyurethane structural foam system used in the reaction injection molding (RIM) process. This system incorporates a specially engineered interactive blowing system (IBS) and is supplied as two reactive liquid components. Component A is a modified polymeric diphenylmethane diisocyanate (PMDI) prepolymer blend, and Component B is a formulated polyol system containing no CFC- or HCFC-blowing additives. Baydur 742 IBS system is used in the consumer products market for applications requiring some protective cushioning characteristics. The system is typically molded at medium-to-high densities. As with any product, use of the Baydur 742 IBS system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Message

Baydur 742 IBS is a semirigid polyurethane structural foam system used in the reaction injection molding (RIM) process. This system incorporates a specially engineered interactive blowing system (IBS) and is supplied as two reactive liquid components. Component A is a modified polymeric diphenylmethane diisocyanate (PMDI) prepolymer blend, and Component B is a formulated polyol system containing no CFC- or HCFC-blowing additives.

Baydur 742 IBS system is used in the consumer products market for applications requiring some protective cushioning characteristics. The system is typically molded at medium-to-high densities. As with any product, use of the Baydur 742 IBS system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

General Information
Additive	Blowing Agent
Uses	Structural Foam
Processing Method	Reaction Injection Molding (RIM)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.589	g/cm³	ASTM D792
Molding Shrinkage - Flow (12.7 mm)	0.90 to 1.1	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 12.7 mm)	47		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break, 12.7 mm)	8.07	MPa	ASTM D638
Tensile Elongation (Break, 12.7 mm)	130	%	ASTM D638
Flexural Modulus (12.7 mm)	145	MPa	ASTM D790
Flexural Strength (12.7 mm)	8.07	MPa	ASTM D790
Compressive Strength (12.7 mm)	2.43	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength ¹	No Break		Internal Method

Note Message
1 .	0.5 in

Resin Grade	Manufacturer	Category	Trademark
Tefzel® HT-2170	DuPont Fluoropolymers	ETFE	Tefzel®
Ebalta GM 714 / PUR 4	Ebalta Kunststoff GmbH	PUR, Unspecified	Ebalta
Karina CLEAR PVC COMPOUND -E 85/209-D-AT-IS-SI	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
LNP™ THERMOCOMP™ DF006LXN compound	SABIC Innovative Plastics	PC	LNP™ THERMOCOMP™
Sylvin 8240-55 Orange 5105	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin