Order Products : sales@su-jiao.com
Starglas GX05052
| Category: | PSU , Polysulfone |
| Manufacturer: | Eurostar Engineering Plastics |
| Trademark: | Starglas |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | R28tSR_Starglas-GX05052.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Starglas GX05052 is a Glass Fiber Reinforced PSU resin (also known as Starglas PSU A 10V 3/4) |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.31 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (4.00 mm) | 0.30 to 0.50 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4000 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 95.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.5 | % | ISO 527-2 |
| Flexural Modulus 1 | 4200 | MPa | ISO 178 |
| Flexural Stress | 120 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact Strength 2(23°C) | 40 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 3(1.8 MPa, Unannealed, 64.0 mm Span) | 155 | °C | ISO 75-2/Af |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 to 150 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 310 to 330 | °C | |
| Middle Temperature | 310 to 330 | °C | |
| Front Temperature | 310 to 330 | °C | |
| Processing (Melt) Temp | 310 to 330 | °C | |
| Mold Temperature | 150 | °C |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® PTA2200 | Tekni-Films, a div of Tekni-Plex | Film, PE/PCTFE | TEKNIFLEX® |
| VICTREX® PEEK 90G | Victrex plc | PEEK | VICTREX® PEEK |
| Generic mPE | Generic | mPE | Generic |
| Eptalloy™ PX-057 | Mitsui Chemicals, Inc. | EPDM | Eptalloy™ |
| IDI SMC S90 (Glass Content 22%) | IDI Composites International | TS, Unspecified | IDI SMC |
