Order Products : sales@su-jiao.com
Generic PET - Glass\Mineral
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | R0ip1O_Generic-PET---Glass-Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PET - Glass\Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.38 - 1.70 | g/cm³ | ASTM D792 |
| 23°C | 1.50 - 1.83 | g/cm³ | ISO 1183 |
| Molding Shrinkage | |||
| Flow : 23°C | 0.25 - 0.50 | % | ASTM D955 |
| 23°C | 0.20 - 0.90 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 7000 - 11700 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 152 - 200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 53 - 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 - 216 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 135 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Processing (Melt) Temp | 274 - 288 | °C | |
| Mold Temperature | 96.8 - 108 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PET - Glass\MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo Phenolic CF 9040A | Sumitomo Bakelite North America | Phenolic | Sumitomo Phenolic |
| Sumitomo Silicone SI 9045C | Sumitomo Bakelite North America, Inc. | Silicone | Sumitomo Silicone |
| Dorlyl PVC GFE 75D | DORLYL S.N.C. | PVC, Unspecified | Dorlyl PVC |
| Lupolen 4261 A SW63200 | LyondellBasell Industries | HDPE, HMW | Lupolen |
| Plaslube® PA6/6 CF10 TL15 BK | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
