Order Products : sales@su-jiao.com
INEOS HDPE T60-800-119
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QzYx5g_INEOS-HDPE-T60-800-119.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| T60-800-119 is a narrow molecular weight distribution high density polyethylene copolymer intended for general purpose injection molding applications requiring good rigidity and a glossy surface finish. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.961 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.9 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 4.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 31.4 | MPa | |
| Break | 15.8 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 8.3 | % | |
| Break | 940 | % | |
| Flexural Modulus - Tangent | 1650 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 38 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 3.75 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 78.9 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® S3CW | BASF Leuna GmbH | Nylon 66 | Miramid® |
| AMTOPP SP50 | Inteplast Group | PP, Unspecified | AMTOPP |
| ESPRENE EPDM 532 | Sumitomo Chemical Co., Ltd. | EPDM | ESPRENE EPDM |
| LUVOCOM® 1105-7794/BL VP | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| POLIMAXX 1175SM | IRPC Public Company Limited | PP Homopolymer | POLIMAXX |
