Order Products : sales@su-jiao.com

COBITECH 2

Category:	PET , Polyethylene Terephthalate
Manufacturer:	M&G Gruppo Mossi & Ghisolfi
Trademark:	COBITECH
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QyMUgA_COBITECH-2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
COBITECH 2 resin is a PET copolymer, based on terephthalic acid. Its high melt strength make it well suited for the production of expanded sheets, boards, panels, profiles and beads. Foam sheet can be thermoformed. After crystallization the foamed products can withstand temperature exceeding 200°C (390°F) for short time and are susceptible to mechanical finishing. Scraps of foamed products obtained by COBITECH 2 can be re-used in extrusion without significant I.V. loss. COBITECH 2 is also designed for applications requiring high melt strength, such as blown film.

Message

COBITECH 2 resin is a PET copolymer, based on terephthalic acid. Its high melt strength make it well suited for the production of expanded sheets, boards, panels, profiles and beads. Foam sheet can be thermoformed. After crystallization the foamed products can withstand temperature exceeding 200°C (390°F) for short time and are susceptible to mechanical finishing.
Scraps of foamed products obtained by COBITECH 2 can be re-used in extrusion without significant I.V. loss. COBITECH 2 is also designed for applications requiring high melt strength, such as blown film.

General Information
Features	Copolymer Good melt strength
Uses	Foam Sheet Profile
Forms	Particle
Processing Method	Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Apparent Density	0.88	g/cm³	ASTM D1895
Melt Mass-Flow Rate (MFR)	14	g/10 min	ASTM D1238

Thermal	Nominal Value	Unit
Melting Temperature	248	°C

Additional Information
Intrinsic viscosity (.V.), C. 01/F, +/- 0.100: 1.25 dl/gCrystalline Density, C.04, +/- 0.1: 1.4 g/milMelt Flow Index, C17, +/- 3: 13.5 g/10minColor (b value), C.09: +2 Max.Melting point, MGPI 007, +/- 2: 248°CBulk Density, C16, +/- 5%: 880 Kg/m³

Resin Grade	Manufacturer	Category	Trademark
SABIC® Vestolen A 6013	Saudi Basic Industries Corporation (SABIC)	HDPE	SABIC® Vestolen A
Spartech Polycom PE2A-005	Spartech Polycom	HDPE, HMW	Spartech
AXELERON™ CX K-6923 NT A EXP1	The Dow Chemical Company	HDPE	AXELERON™
ESTACARB PC 0820GF V0	Cossa Polimeri S.r.l.	PC	ESTACARB
LEXAN™ LUX9132C resin	SABIC Innovative Plastics	PC	LEXAN™