EMAC® SP2404

Category: EMA , Ethylene Methyl Acrylate Copolymer
Manufacturer: Westlake Chemical Corporation
Trademark: EMAC®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: QwSIbr_EMAC-SP2404.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Westlake EMAC® SP2404 is a 18.5% EMA copolymer designed for blown film, tie-layer, coextrusions and blending where flexibility and strength are important. SP2404 provides excellent elasticity and low temperature performance. Articles produced from SP2404 will exhibit very high C.O.F without addition of slip or anti-blocking agents.
General Information
Features
  • Low Temperature Flexibility
  • High ESCR (Stress Cracking Resistance)
  • Copolymer
  • Good toughness
  • Soft
Uses
  • Films
  • cast film
  • Bonding resin
Agency Ratings
  • FDA 21 CFR 177.1340
Forms
  • Particle
PhysicalNominal ValueUnitTest Method
Density 0.941g/cm³ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)2.5g/10 minASTM D1238
HardnessNominal ValueUnitTest Method
Durometer Hardness (Shore D)39ASTM D2240
MechanicalNominal ValueUnitTest Method
Tensile Strength 1(Break)12.7MPaASTM D638
Tensile Elongation 2(Break)740%ASTM D638
ThermalNominal ValueUnitTest Method
Brittleness Temperature < -73.0°CASTM D746
Vicat Softening Temperature 60.0°CASTM D1525
Melting Temperature (DSC) 86.0°CASTM D3418
Additional Information
Methyl Acrylate Content - 18.5%
Note Message
1 .Type 4,500mm/min
2 .Type 4,500mm/min
Resin Grade Manufacturer Category Trademark
RTP 1507-55D RTP Company TPE RTP
Varcum 29315 Durez Corporation Phenolic Varcum
4MID® 9A13100 4Plas Nylon 66 4MID®
Electrafil® J-1/CF/40 BK Techmer Engineered Solutions Nylon 66 Electrafil®
LONGLITE® PBT 3030-104S CCP Group PBT LONGLITE® PBT