Order Products : sales@su-jiao.com

NuSil MED-6385

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QtWrr1_NuSil-MED-6385.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: FAST CURE, OPAQUE

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfi lling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: FAST CURE, OPAQUE

General Information
Features	Fast Cure Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Opaque
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.50

Additional Information	Nominal Value	Unit
Cure System	Tin-Alkoxy

Uncured Properties	Nominal Value	Unit
Density	1.13	g/cm³
Viscosity	45	Pa·s
Curing Time (23°C)	24	hr
Pot Life (25°C)	7.0	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	45
Tensile Strength	3.45	MPa
Tensile Elongation at Break	180	%

Resin Grade	Manufacturer	Category	Trademark
Rhelon G2513H-01	RheTech, Inc.	Nylon 66	Rhelon
Starflam P10002Z	Eurostar Engineering Plastics	Nylon 6	Starflam
SUMILITE® PL-1621 (Machining)	Sumitomo Bakelite Co., Ltd.	Phenolic	SUMILITE®
MTM® 21S	Cytec Industries Inc.	Polyester, TS	MTM®
Estane® 5703 TPU	Lubrizol Advanced Materials, Inc.	TPU-Polyester	Estane®