Order Products : sales@su-jiao.com

NuSil CF1-6755

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Qt4gWs_NuSil-CF1-6755.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and Sealants Comments: Tough Elastomer

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Adhesives and Sealants

Comments: Tough Elastomer

General Information
Features	Good Corrosion Resistance Good Thermal Stability Good Toughness Low Moisture Absorption Low Shrinkage
Uses	Adhesives Electrical/Electronic Applications Sealants

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-115 to 260	°C

Uncured Properties	Nominal Value	Unit
Color	Translucent
Density	1.14	g/cm³
Viscosity
-- ¹	35	Pa·s
-- ²	40	Pa·s
Curing Time (150°C)	0.50	hr
Pot Life	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	4.65	MPa
Tensile Elongation at Break	280	%
Tear Strength	7.01	kN/m

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Michilene F8200TL20	API Polymers, Inc.	PP Copolymer	Michilene
Skyrol® SH21	SKC Inc.	PET	Skyrol®
4DUR® 9K22730 FR3	4Plas	PBT	4DUR®
Lucent PC PC/PBT-1420IM	Lucent Polymers, Inc.	PC+PBT	Lucent PC
Petrotene® PP A3 T30 NTLA010 PH323	Petropol Industry and Trade of Polymers LTDA	PP Homopolymer	Petrotene® PP