Order Products : sales@su-jiao.com
LubriOne™ NL-30GF/15T-2S BLACK
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | LubriOne™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qsq6k3_LubriOneNL30GF15T2SBLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glass fiber reinforced PA612 compound with PTFE and silicone lubricated |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 115 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.40 mm, Injection Molded) | 170 | J/m | ASTM D256A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.0 mm) | HB | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 - 90 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 240 - 270 | °C | |
| Mold Temperature | 65 - 85 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4007 TFE 13 SI 2 | RTP Company | PPA | RTP |
| tefabloc® TP SD 310 40A | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| NatureFlex™ 21NP | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| Ferro PP TPP40AE04UL-NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| Gallonprene® GP420-8507 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
