Order Products : sales@su-jiao.com
Epoxies, Ect. 20-1615
| Category: | Silicone , Silicone |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QsirNG_Epoxies-Ect-20-1615.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
20-1615 is a two component, room temperature curing silicone rubber compound. This silicone system is clear, odorless, and low in viscosity. 20-1615 is an excellent choice for potting electronic assemblies that require shock and vibration resistance. It also protects assemblies from moisture, ozone, chemicals and other environmental hazards. Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.20 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 1.8E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.017 | W/m/K |
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index | 1.400 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -65.0 to 205 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Clear/Transparent | ||
| Mix Ratio by Weight (PBW) | |||
| Part A | 100 | ||
| Part B | 10 | ||
| Density (25°C) | 1.03 | g/cm³ | |
| Viscosity 1(25°C) | 6.0 | Pa·s | |
| Curing Time | |||
| -- | 0.17 to 0.25 | hr | |
| 125°C | 0.75 | hr | |
| 100°C | 1.0 | hr | |
| 65°C | 4.0 | hr | |
| 25°C | 24 to 48 | hr | |
| Pot Life (25°C) | 20 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 40 | ||
| Tensile Strength | 6.55 | MPa | |
| Tensile Elongation at Break | 120 | % | |
| Electric Strength | 20 | kV/mm | |
| Relative Permittivity (1 kHz) | 2.70 | ||
| Volume Resistivity | 1.2E+15 | ohms·cm | |
| Dissipation Factor (1 kHz) | 4.0E-4 |
| Note Message | |
|---|---|
| 1 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 280.5 TFE 13 SI 2 | RTP Company | Nylon 66 | RTP |
| RTP 800 MG 20 TFE 15 | RTP Company | Acetal (POM) Copolymer | RTP |
| 4LAC® 10H20500 HG | 4Plas | ABS | 4LAC® |
| Medalist® MD-12180 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Medalist™ |
| LEXAN™ OQ1028 resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
