Order Products : sales@su-jiao.com

POTICON RF25X2

Category:	PPS , Polyphenylene Sulfide
Manufacturer:	Otsuka Chemical Co., Ltd.
Trademark:	POTICON
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QryxmI_POTICONRF25X2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover, as Poticon diminishes damage toward the mold and metal die and offers excellent recyclability, it also decreases processing costs.

Advantages

Microscopic reinforcement

Superior friction sliding and wear reduction

Excellent dimensional accuracy and surface smoothness

Highly recyclable

Applications

Automotive Parts (gears, bearings)

LED Reflectors

Watch Parts (gears, ground plane)

Camera (image stabilization parts)

Sliding Parts (gears, wheel bearing)

Camera Module Parts

Motor Parts (cog-wheels, bearings)

RF25X2 Property: Slide, Conductive property

General Information
Features	High Dimensional Stability Conductivity Low friction coefficient Recyclable materials
Uses	LEDs Gear Application in Automobile Field Camera application Bearing
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.56	g/cm³	ASTM D792
Molding Shrinkage
Flow	0.80	%
Transverse flow	1.4	%
Water Absorption (Equilibrium)	0.020	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	48		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	48.0	MPa	ASTM D638
Tensile Elongation (Break)	1.4	%	ASTM D638
Flexural Modulus	5600	MPa	ASTM D790
Flexural Strength	60.0	MPa	ASTM D790
Coefficient of Friction (vs. Steel - Dynamic)	0.18
Abrasion Loss
-- ¹	3.90	10^-3 mm³/N·km
of counterpart ²	0.00	10^-3 mm³/N·km

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	217	°C	ASTM D648

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	34	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	4.9E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+4	ohms·cm	ASTM D257

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-2		UL 94

Injection	Nominal Value	Unit
Processing (Melt) Temp	290 - 320	°C
Mold Temperature	120 - 150	°C
Injection Pressure	70.0 - 100	MPa

Note Message
1 .	Surface pressure: 1MPa
2 .	Slipping velocity: 0.3m/sec

Resin Grade	Manufacturer	Category	Trademark
SHIN-A SEN-6322MPM70	SHIN-A T&C	Epoxy	SHIN-A
Texalan® 5 Series 585A	Austin Novel Materials Co. Ltd.	TPU-Polyester	Texalan® 5 Series
ADEKA QR-9466	Adeka Corporation	Epoxy	ADEKA
EXCELLOY AK10	Techno Polymer Co, Ltd.	ABS+Nylon	EXCELLOY
SUMIMAC® ECR-9250K	SBHPP	Epoxy	SUMIMAC®