Order Products : sales@su-jiao.com
Estane® 54640 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qri8TO_Estane-54640-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 54640 is an 85A aromatic Polyether-Based Thermoplastic Polyurethane (TPU). Features: Very good physical properties and hydrolysis resistance and wide processing window for calendering. Uses: Melt coating/calendering, flat die/cast film extrusion |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 82 - 88 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 14 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 6.20 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 11.7 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 45.5 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 520 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 68.6 | kN/m | ASTM D624 |
| Cracking | 21 | kN/m | ASTM D470 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Volume (23°C, 24 hr, in water) | 1.3 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -49.0 | °C | DSC |
| Melting Temperature | 135 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 177 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 4 Temp. | 188 | °C | |
| Adapter Temperature | 188 | °C | |
| Melt Temperature | 185 | °C | |
| Die Temperature | 188 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 199 X 116346 | RTP Company | PP, Unspecified | RTP |
| SABIC® PP 412MK49 | Saudi Basic Industries Corporation (SABIC) | PP Copolymer | SABIC® PP |
| Clariant Nylon 6/6 PA-111TF20 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| ECONAMID® 6ST2 | DOMO Engineering Plastics SPA | Nylon 6 | ECONAMID® |
| OmniPro™ HPP GRC30 | OMNI Plastics, LLC | PP Homopolymer | OmniPro™ |
