Order Products : sales@su-jiao.com
ColorRx® PPSU-2000RX
| Category: | PPSU , Polyphenylsulfone |
| Manufacturer: | LTL Color Compounders, Inc. |
| Trademark: | ColorRx® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QqNYAp_ColorRx-PPSU-2000RX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A high flow, injection molding grade of biocompatible PPSU resin for healthcare applications. This product is not intended for applications involving greater than 24 hours body contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.70 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.37 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 68.9 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 7.2 | % | |
| Break | 60 | % | |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 690 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 207 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2258 | Covestro - Polycarbonates | PC | Makrolon® |
| TAROMID B 280 MT5 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| NuSil MED20-2955 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| CERTENE™ LLI-5026 | Muehlstein | LLDPE | CERTENE™ |
| Lucent PP TPP-140 | Lucent Polymers, Inc. | PP Homopolymer | Lucent PP |
