Order Products : sales@su-jiao.com
POLYCOMPO PE 5100B
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QqLZoR_POLYCOMPO-PE-5100B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 5100B is a High Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific. Typical application: Containers. Primary characteristic: bacteria resistant. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.944 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 0.27 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Compression Molded) | 600 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 61 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 21.0 | MPa | |
| Break, Compression Molded | 17.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 850 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 13 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 119 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 126 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 3314 | Formosa Plastics Corporation | LLDPE | TAISOX |
| Axiall PVC 18753 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| ESENTTIA 05C05 | Polipropileno del Caribe S.A. | PP Impact Copolymer | ESENTTIA |
| Hostacom 65F4-3 | LyondellBasell Industries | PP Homopolymer | Hostacom |
| PLUSTEK RA303G3 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
