Order Products : sales@su-jiao.com
ESPOLEX WT502
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Sumitomo Chemical America, Inc. |
| Trademark: | ESPOLEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qnkw34_ESPOLEX-WT502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ESPOLEX WT502 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by injection molding and is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: sealing applications. The main characteristics are: beautiful. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/10.0 kg) | 50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 72 | ASTM D2240 | |
| Shaw A, 5 seconds | 66 | ASTM D2240 | |
| Shaw A, 15 seconds | 64 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 2.10 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 7.70 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 760 | % | ASTM D412 |
| Compression Set (70°C, 22 hr) | 45 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 - 243 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Injection instructions |
|---|
| Injection Pressure: HighPack/Hold Pressure: 40-70% of Inj PressScrew RPM: SlowPart Draft: 3-6° per sideTool Surface Finish: Light Texture |
| Note Message | |
|---|---|
| 1 . | Mouth die C, 500 mm/min |
| 2 . | C mold, 500 mm/min |
| 3 . | Mouth die C, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex NH-1907 | SAMSUNG SDI CO., LTD. | PS (HIPS) | Starex |
| YUCLAIR® RF500U | SK Global Chemical | MDPE | YUCLAIR® |
| Arlon® 35NQ | Arlon-MED | PI, TP | Arlon® |
| Petrothene® NA206000 (Injection Molding) | LyondellBasell Industries | LDPE | Petrothene® |
| Sylvin 8773-60D Brown 7373 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
