Order Products : sales@su-jiao.com
LTM® 110 series
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | LTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QmlNGK_LTM-110-series.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LTM110 series prepregs are high service temperature cyanate ester resin system capable of initial cure at temperatures as low as 70°C (158°F). After a suitable post-cure, the glass transition temperature can be increased to a maximum of 330°C (626°F), thus allowing components to withstand short duration thermal spikes up to this temperature. LTM110 series component prepregs have been specifically developed for applications where the best dimensional stability is required over a wide temperature range, and where tooling suitable for high temperature autoclave curing is not available. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.28 | g/cm³ |
| Electrical | Nominal Value | ||
|---|---|---|---|
| Dielectric Constant (14.0 GHz) | 2.98 |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC6HBA (Series: AD/POM) | KRAIBURG TPE | TPE | THERMOLAST® K |
| VITAMIDE® AR34BK8516 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| Mytex® AS65K-2ATM | Mytex Polymers | PP, Unspecified | Mytex® |
| Nymax™ 1200 A UV White 205 | PolyOne Corporation | Nylon 66 | Nymax™ |
| EPITEC® PC-940FV | Osterman & Company | PC | EPITEC® |
