Order Products : sales@su-jiao.com

Promyde® B30 P2 GFC15

Category:	Nylon 6 , Polyamide 6
Manufacturer:	NUREL, S.A.
Trademark:	Promyde®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Qi6uXO_Promyde-B30-P2-GFC15.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Promyde B30 P2 GFC15 is a Polyamide 6 injection moulding grade with 15% glass fibre and heat stabilized.

CHARACTERISTICS
Promyde B30 P2 GFC15 is distinguished by high mechanical strength, hardness, rigidity, thermo stability (melting point 222°C), and resistance to hot lubricants and water. Parts made from Promyde B30 P2 GFC15 have particularly high dimensional stability and creep strength. This material is suitable for Food Contact applications.

APPLICATIONS
Promyde B30 P2 GFC15 is used in a wide range of applications where a combination of mechanical properties and thermal resistance is needed.

Glass-fibre reinforced grades are suitable for housings, supports, industrial articles and electrical insulating parts.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 15% filler by weight
Additive	heat stabilizer
Features	Good dimensional stability Rigidity, high High strength Insulation Good creep resistance Thermal Stability Thermal stability, good Compliance of Food Exposure High hardness
Uses	Electrical components Electronic insulation Industrial application Shell
Processing Method	Injection molding

Physical	Dry	Conditioned	Unit	Test Method
Density (23°C)	1.22	--	g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (275°C/5.0 kg)	60.0	--	cm³/10min	ISO 1133
Molding Shrinkage
Vertical flow direction	0.60 - 0.90	--	%
Flow direction	0.40 - 0.70	--	%
Water Absorption				ISO 62
Saturated, 23°C	8.0	--	%	ISO 62
Equilibrium, 23°C, 50% RH	2.6	--	%	ISO 62
Viscosity Number	145	--	cm³/g	ISO 307

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	6000	3400	MPa	ISO 527-2/1
Tensile Stress (Break, 23°C)	150	78.0	MPa	ISO 527-2/50
Tensile Strain (Yield, 23°C)	3.5	7.0	%	ISO 527-2/50
Flexural Modulus ¹(23°C)	5000	2400	MPa	ISO 178
Flexural Stress ²(23°C)	180	90.0	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	5.0	--	kJ/m²	ISO 179/1eA
23°C	5.5	12	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	43	--	kJ/m²	ISO 179/1eU
23°C	50	90	kJ/m²	ISO 179/1eU

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	215	--	°C	ISO 75-2/B
1.8 MPa, not annealed	200	--	°C	ISO 75-2/A
Melting Temperature (DSC) ³	222	--	°C	ISO 3146
Linear thermal expansion coefficient				ISO 11359-2
Flow : 23 to 80°C	3.0E-5	--	cm/cm/°C	ISO 11359-2
Lateral : 23 to 80°C	7.0E-5	--	cm/cm/°C	ISO 11359-2

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	1.0E+13	1.0E+10	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Dielectric Constant (1 MHz)	3.60	6.90		IEC 60250
Dissipation Factor (1 MHz)	0.025	0.22		IEC 60250
Comparative Tracking Index	500	--	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating (1.50 mm)	HB	--		UL 94

Injection	Dry	Unit
Drying Temperature	80.0	°C
Drying Time	4.0 - 6.0	hr
Processing (Melt) Temp	250 - 270	°C
Mold Temperature	40.0 - 80.0	°C
Injection Rate	Moderate-Fast

Injection instructions
Back Pressure: moderate

Note Message
1 .	2.0 mm/min
2 .	2.0 mm/min
3 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
Quadrathane™ ARC-85A	Biomerics, LLC	TPU-PC	Quadrathane™
Wanthane® WHT-8190	Wanhua Chemical Group Co., Ltd.	TPU-Polyether	Wanthane®
Abstron IM-14 S	Bhansali Engineering Polymers Limited	ABS	Abstron
APEX® 95-A0121B-69	Teknor Apex Company	PVC, Flexible	APEX®
LOXIM 820 02T V0	LOXIM Industries Private Limited	PP, Unspecified	LOXIM