Order Products : sales@su-jiao.com
TRILAC® ABS-MP1000
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Polymer Technology and Services, LLC |
| Trademark: | TRILAC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QhXMCh_TRILAC-ABS-MP1000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRILAC® ABS-MP1000 is an Acrylonitrile Butadiene Styrene (ABS) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 23 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 103 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 44.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 25 | % | ASTM D638 |
| Flexural Modulus | 2250 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 73.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.17 mm) | 290 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 89.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.59 mm | HB | ||
| 3.17 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 to 93.3 | °C | |
| Drying Time | 2.0 to 24 | hr | |
| Rear Temperature | 193 | °C | |
| Middle Temperature | 216 | °C | |
| Front Temperature | 232 | °C | |
| Processing (Melt) Temp | 218 to 260 | °C | |
| Mold Temperature | 48.9 to 65.6 | °C | |
| Injection Pressure | 68.9 to 82.7 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.689 | MPa | |
| Screw Speed | 50 to 60 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT HV1011 | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| Sinvicomp SGH5040 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| Fainplast PVC GS 75/R1 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| ELASTOSIL® 8000 N | Wacker Chemie AG | Silicone | ELASTOSIL® |
| Grupo IDESA HIPS HI-760-L-01 | Grupo IDESA, S.A. de C.V. | SBC | Grupo IDESA HIPS |
