Order Products : sales@su-jiao.com
Filter-bond™ R-30-6
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | Hapco Inc. |
| Trademark: | Filter-bond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qgx8yd_Filter-bond-R-30-6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Filter-bond is a series of casting and potting compounds ideally suited for medical and food contact applications. This Filter-bond R-SERIES is manufactured to ultra-high quality standards and has been used by customers to pass biocompatibility requirements. The FILTER-bond R-30-6 Series feature 3 potting and adhesive systems specifically designed for potting and/or bonding Ultrafiltration products. The FILTER-bond R-30-6 Series DO NOT CONTAIN AROMATIC AMINES or other carcinogenic or mutenogenic materials. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.25 to 0.40 | % | ASTM D2566 |
| Weight - per cubic inch | 18 | g |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 173 | °C | ASTM D648 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 38.0 to 48.0 | min | ASTM D2971 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time (100°C) | 12.0 to 18.0 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 to 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2740 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 82.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.7 | % | ASTM D638 |
| Flexural Modulus | 2990 | MPa | ASTM D790 |
| Flexural Strength | 97.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 17 | J/m | ASTM D256 |
| Unnotched Izod Impact | 36 | J/m | ASTM D256 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 33, Mix Ratio by Volume: 28 | ||
| Thermoset Mix Viscosity (25°C) | 8000 to 14000 | cP | ASTM D4878 |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-70/30 NAT | Techmer Engineered Solutions | Nylon 66+PP | TES |
| TITANZEX® HF7000 | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANZEX® |
| Diamond AES 177 | Network Polymers, Inc. | AES | Diamond AES |
| FHR Polypropylene P4C6B-134A | Flint Hills Resources, LP | PP Homopolymer | FHR Polypropylene |
| Kemcor HD 0811 | Qenos Pty Ltd | HDPE, HMW | Kemcor |
