Order Products : sales@su-jiao.com
Paxon™ AS55-003
| Category: | HDPE, UHMW , High Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Paxon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QgVD8T_Paxon-AS55-003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AS55-003 is a blow molded high density polyethylene copolymer containing antistatic agent. It achieves a good balance between hardness and stress cracking resistance. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal) | 25.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 28.0 | MPa | ASTM D638 |
| Flexural Modulus | 1310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 189 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Legal statement |
|---|
| 本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| polyvic® E-1828-IL | Unipack Plasindo | PVC, Unspecified | polyvic® |
| Ravalene CR C 7654 | Ravago Group | LLDPE | Ravalene |
| KOPA® KN333G20BL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| ICORENE® N4435 | ICO Polymers EMEA, A Division of A. Schulman | PP Homopolymer | ICORENE® |
| LNP™ THERMOCOMP™ LC004XXP compound | SABIC Innovative Plastics Europe | PEEK | LNP™ THERMOCOMP™ |
