Order Products : sales@su-jiao.com
Borealis PP RA130E-6034
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QfmtNn_Borealis-PP-RA130E-6034.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RA130E-6034 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured. The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. RA130E-6034 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented.
The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.30 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 900 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 25.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 14 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 800 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 2.0 | kJ/m² | ISO 179/1eA |
| 0°C | 3.5 | kJ/m² | ISO 179/1eA |
| 23°C | 20 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | 40 | kJ/m² | ISO 179/1eU |
| 0°C | No Break | ISO 179/1eU | |
| 23°C | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow (0 to 70°C) | 1.5E-4 | cm/cm/°C | DIN 53752 |
| Thermal Conductivity | 0.24 | W/m/K | DIN 52612 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 - 210 | °C | |
| Cylinder Zone 2 Temp. | 180 - 210 | °C | |
| Cylinder Zone 3 Temp. | 180 - 210 | °C | |
| Cylinder Zone 4 Temp. | 180 - 210 | °C | |
| Cylinder Zone 5 Temp. | 180 - 210 | °C | |
| Melt Temperature | 220 | °C | |
| Die Temperature | 210 - 220 | °C |
| Extrusion instructions |
|---|
| Barrel: 210 to 220°C |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LHI211 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Sinpolene MBW0551 | Teknor Apex Asia Pacific PTE. LTD. | LLDPE | Sinpolene |
| Fainplast PVC PM 8010/S | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| KOPLA PP KPQ1031 | KOPLA Co., Ltd. | PP, Unspecified | KOPLA PP |
| LubriOne™ PS-30GF/2S Natural | PolyOne Corporation | PBT | LubriOne™ |
