Order Products : sales@su-jiao.com
SABIC® PPcompound 3240EH
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QfRx4n_SABIC-PPcompound-3240EH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 3240EH is a 40% talc-filled polypropylene homopolymer with good flow, high heat stabilized at low volatiles. SABIC® PPcompound 3240EH is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.90 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 73 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5/50 | ||
| Yield, 3.20 mm, Injection Molded | 30.0 | MPa | |
| Break, 3.20 mm, Injection Molded | 24.0 | MPa | |
| Tensile Strain (Break, 3.20 mm, Injection Molded) | 5.0 | % | ISO 527-2/5/50 |
| Flexural Modulus 1(Injection Molded) | 3600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 2.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (-40°C, Injection Molded) | 5.0 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact Strength | ISO 180/4A | ||
| -20°C, Injection Molded | 1.5 | kJ/m² | |
| 0°C, Injection Molded | 1.6 | kJ/m² | |
| 23°C, Injection Molded | 2.8 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 130 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 150 | °C | ISO 306/A |
| Note Message | |
|---|---|
| 1 . | Method I (3 point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTAPEEK MOD | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| SureSpec RP-350 | Genesis Polymers | PP Random Copolymer | SureSpec |
| Desmopan® 5377A | Covestro - PUR | TPU-Ester/Ether | Desmopan® |
| Geon™ Vinyl Flexible XV3772 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| INNOPOL® PP CS 2-9523 SR | Inno-Comp Ltd. | PP Impact Copolymer | INNOPOL® PP |
