Sarlink® TPV 2455-1 Datasheet,TPV,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink TPV 2455-1 is a high performance thermoplastic vulcanizate used in a variety of consumer and industrial applications, including seals and gaskets, where copper stabilization is required. Sarlink TPV 2455-1 is a medium hardness, low density grade with good resiliency and compression set designed for injection molding.

General Information
Features	Low Specific Gravity Low density Workability, good Good adhesion Good chemical resistance Copper contact stability Elastic Medium hardness
Uses	Plug Washer Washer Industrial application Pipe Seals Rubber substitution Assembled glass
RoHS Compliance	RoHS compliance
Appearance	Opacity Black
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.938	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 5 sec)	55		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	2.07	MPa	ASTM D412
Tensile Strength (Yield)	3.72	MPa	ASTM D412
Tensile Elongation (Break)	300	%	ASTM D412
Tear Strength	19.3	kN/m	ASTM D624
Compression Set			ASTM D395B
23°C, 22 hr	22	%	ASTM D395B
100°C, 22 hr	42	%	ASTM D395B

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-60.0	°C	ASTM D746

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time	3.0	hr
Rear Temperature	173 - 213	°C
Middle Temperature	179 - 219	°C
Front Temperature	184 - 224	°C
Nozzle Temperature	190 - 230	°C
Processing (Melt) Temp	190 - 230	°C
Mold Temperature	35 - 60	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Product should be dried prior to processing as shown

Extrusion	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time	3.0	hr
Cylinder Zone 1 Temp.	166 - 204	°C
Cylinder Zone 2 Temp.	171 - 210	°C
Cylinder Zone 3 Temp.	177 - 216	°C
Cylinder Zone 4 Temp.	177 - 216	°C
Cylinder Zone 5 Temp.	182 - 221	°C
Die Temperature	190 - 227	°C

Extrusion instructions
Product should be dried prior to processing. Screw Speed: 30 to 100 rpm

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPV
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QfMnGc_SarlinkTPV24551.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SolVin 557RB	INOVYN	PVC Copolymer	SolVin
Gallonprene® GP210-8509	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Huafon JF-W-AH6046	Huafon Group Co., Ltd.	PUR, Unspecified	Huafon
Sumiliteresin® PR-F-47 I	SBHPP	Phenolic	Sumiliteresin®
Durethan® C 38 F 000000	LANXESS GmbH	Nylon 6	Durethan®