Order Products : sales@su-jiao.com
Plenco 03509 (Transfer)
| Category: | Phenolic , Phenolic |
| Manufacturer: | Plastics Engineering Co. |
| Trademark: | Plenco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qeb2UP_Plenco-03509-Transfer-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PLENCO 03509 is a mineral and flock filled phenolic molding compound offering excellent electrical properties, dimensional stability, and improved heat resistance. UL recognized under component file E40654. 03509 is available in black or brown. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | ASTM D792 |
| Apparent Density | 0.64 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.30 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.14 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (E-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 10700 | MPa | ASTM D638 |
| Tensile Strength | 61.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 0.80 | % | ASTM D638 |
| Flexural Modulus | 9840 | MPa | ASTM D790 |
| Flexural Strength | 99.5 | MPa | ASTM D790 |
| Compressive Strength | 201 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 22.1 | J/m | ASTM D256 |
| Notched Izod Impact | 20 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 194 | °C | ASTM D648 |
| Continuous Use Temperature | 204 | °C | ASTM D794 |
| CLTE - Flow | 4.7E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 5.3E+11 | ohms·cm | ASTM D257 |
| Dielectric Strength | ASTM D149 | ||
| -- 1 | 16 | kV/mm | ASTM D149 |
| -- 2 | 12 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 5.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.041 | ASTM D150 | |
| Arc Resistance | 161 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 175 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | UL 94 | |
| Oxygen Index | 38 | % | ASTM D2863 |
| Additional Information |
|---|
| The value listed as Mold Shrink, Linear-Flow, ASTM D955 was tested according to the ASTM D6289 standard.The value listed as Comparative Tracking Index, UL 746 was tested according to ASTM D3638.Post Shrinkage, ASTM D6289, 72hr, 120°C: 0.12%Heat Resistance, ASTM D794: 204°CDrop Ball Impact, PLENCO Method: 126 J/m |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| 2 . | Method B (step by step) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 155 | RTP Company | PP, Unspecified | RTP |
| Sindustris PP HR2101D | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| WPP PP PPH4GF3-Black | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| NOVAPOL® HB-W555-EC | NOVA Chemicals | HDPE | NOVAPOL® |
| TECACOMP® PA66 TC white 4040 | Ensinger GmbH | Nylon 66 | TECACOMP® |
