Order Products : sales@su-jiao.com

Shin-Etsu Elastomer KE-1950-70A/B

Category:	Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer:	Shin-Etsu Silicones of America
Trademark:	Shin-Etsu Elastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Qd8mga_Shin-Etsu-Elastomer-KE-1950-70A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Shin-Etsu KE-1950-70 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-70 is low enough to allow easy pumping through most injection molding systems.

Rapid cure time at elevated temperature.

Long pot life at room temperature.

Typical Applications

O-rings. - Diaphragms.

Capping.

Rubber rollers.

Connector packings.

Other electrical parts

General Information
Features	Low viscosity Workability, good Fast curing
Uses	Electrical/Electronic Applications Electrical components Diaphragm Roller Shield
Agency Ratings	FDA not rated USP Class VI
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Physical	Nominal Value	Unit
Specific Gravity	1.15	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness	70

Elastomers	Nominal Value	Unit
Tensile Stress (100% Strain)	4.76	MPa
Tensile Strength	7.80	MPa
Tensile Elongation (Break)	350	%
Tear Strength ¹	39.9	kN/m
Compression Set (180°C, 22 hr)	13	%

Thermoset	Nominal Value	Unit
Post Cure Time (200°C)	4.0	hr

Additional Information
Press Cure / Post Cure: Press/Post

Uncured Properties	Nominal Value	Unit
Curing Time	0.083	hr

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
VAMPCARB 1026 V0	Vamp Tech	PC	VAMPCARB
Network Polymers PP PPH 30 2000	Network Polymers, Inc.	PP Homopolymer	Network Polymers PP
New-prene™ 8065N	Total Polymer Vision (Suzhou) Co., LTD	PP+EPDM	New-prene™
DIOSHY® AB-890AM-1	DIOSHY Co.,Ltd.	SEBS	DIOSHY®
Geon™ 180 Series 186A	Mexichem Specialty Resins, Inc.	PVC Homopolymer	Geon™ 180 Series