Monprene® OM-16175 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene OM-16175 is a specialty thermoplastic elastomer designed for overmolding applications like grips and anti-skid parts for a variety of consumer and industrial products. Monprene OM-16175 is a medium hardness, low density opaque grade that is available in Black, Natural, and can be pre-colored, and exhibits excellent adhesion to nylon.

General Information
Features	smoothness Light stabilization Adhesiveness Good coloring Good adhesion Medium liquidity Lubrication Medium density Medium hardness
Uses	Handle overmolding Power/other tools Soft handle Mobile phone Sporting goods Rubber substitution Knob Bonding
RoHS Compliance	RoHS compliance
Appearance	Unspecified Color Black Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.958	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	20	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	77	ASTM D2240
Shore A, 5 seconds, injection molding	75	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	2.55	MPa	ASTM D412
Flow : 100% strain	2.98	MPa	ASTM D412
Transverse flow : 300% strain	4.81	MPa	ASTM D412
Flow : 300% strain	5.85	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	8.23	MPa	ASTM D412
Flow : Fracture	7.51	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	490	%	ASTM D412
Flow : Fracture	420	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	37.7	kN/m	ASTM D624
Flow	35.9	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	41	%	ASTM D395B
70°C, 22 hr	76	%	ASTM D395B

Additional Information	Nominal Value
Adhesion to Nylon

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	60	°C
Drying Time	2.0 - 4.0	hr
Rear Temperature	182 - 204	°C
Middle Temperature	182 - 204	°C
Front Temperature	182 - 204	°C
Nozzle Temperature	182 - 204	°C
Processing (Melt) Temp	182 - 204	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Moisture can degrade the material. Drying is suggested. This can be accomplished by placing the material in a desiccant dryer for 2 to 4 hours at 140°F.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	171 - 193	°C
Cylinder Zone 2 Temp.	171 - 193	°C
Cylinder Zone 3 Temp.	171 - 193	°C
Cylinder Zone 4 Temp.	171 - 193	°C
Cylinder Zone 5 Temp.	171 - 193	°C
Die Temperature	171 - 193	°C

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QauaDw_MonpreneOM16175.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SPESIN® KP270GR	Kolon Plastics, Inc.	PBT	SPESIN®
SUNPRENE® FE60JB	Mitsubishi Chemical Performance Polymers, Inc.	PVC Elastomer	SUNPRENE®
NuSil CV-2646	NuSil Technology	Silicone	NuSil
Arnite® TV8 260	DSM Engineering Plastics	PBT	Arnite®
Lucofin® 1414-t2	Lucobit AG	Polyolefin, Unspecified	Lucofin®