Order Products : sales@su-jiao.com
KRATON® D1119 B
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QYLziP_KRATON-D1119-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1119 B is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from South America in the physical form identified below.
Kraton D1119 B is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 25 | g/10 min | ASTM D1238 |
| Antioxidant Additive | 0.10 to 0.20 | % | Internal Method |
| Ash Content - Product form "T" | 0.40 to 0.80 | % | ISO 247 |
| Extractables | < 1.0 | % | Internal Method |
| Polystyrene Content | 21 to 24 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 66.0 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 30 sec, Compression Molded) | 30 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 1.10 | MPa | ISO 37 |
| Tensile Stress 2(Yield) | 2.40 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 1000 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Measured on films cast from a solution in toluene |
| 2 . | Measured on films cast from a solution in toluene |
| 3 . | Measured on films cast from a solution in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® Vestolen A 5061R 65308 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| Yanshan PE LD113 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| KumhoSunny PC/PBT HCB9310G | Shanghai KumhoSunny Plastics Co., Ltd. | PC+PBT | KumhoSunny PC/PBT |
| LUBEMID A26 GF20 NATURAL | LUBEN PLAST srl | Nylon 66 | LUBEMID |
| PALRAN® R S 20 | pal plast GmbH | ABS | PALRAN® |
