Order Products : sales@su-jiao.com
UNITAL® SFX-0102M
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | Nytef Plastics, Ltd. |
| Trademark: | UNITAL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QWGSc9_UNITAL-SFX-0102M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITAL SFX-0102M extruded thermoplastic shapes provide users with the strength and dimensional stability inherent in POM-based resins as well as enhanced stiffness provided by the addition of a metallic filler. UNITAL SFX-0102M shapes offer low extractables for applications requiring FDA compliance and are especially well suited for metal detection in food processing applications. UNITAL SFX-0102M is available in multiple rod and plate configurations by special order. Minimums order quantities may apply due to the highly specialized nature of product applications, dependent on configuration. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.68 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | < 0.20 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2550 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 48.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 to 10 | % | ASTM D638 |
| Flexural Modulus | 3170 | MPa | ASTM D790 |
| Flexural Strength | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 116 | °C | ASTM D648 |
| Glass Transition Temperature | 160 | °C | ASTM D3418 |
| CLTE - Flow | 2.2E-4 | cm/cm/°C | ASTM D696 |
| RTI Str | 60.0 | °C | UL 746 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SPESIN® KP513UG | Kolon Plastics, Inc. | PBT | SPESIN® |
| Witcom PBT 2S | Witcom Engineering Plastics B.V. | PBT | Witcom PBT |
| Borealis PE MG9641 | Borealis AG | HDPE | Borealis PE |
| Delene 5598 | Shanghai Lin Gen Rubber Materials Co., Ltd. | TPE | Delene |
| Geon™ Vinyl Rigid Molding M4821 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
