Order Products : sales@su-jiao.com
CERTENE™ PHM-12AN
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QVHQup_CERTENE-PHM-12AN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHM-12AN is a certified prime grade Nucleated Polypropylene designed for injection molding general purpose applications. PHM-12AN contains antistatic and combines a good balance of medium-high flow processability with good tensile strength, high stiffness and good contact clarity. PHM-12AN applications include thin-walled containers, medical ware, housewares, caps and closures, toys, and housings for small electrical appliances. PHM-12AN recommended processing temperature is between 210° to 230°C with mold at 20°-50°C. PHM-12AN complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 37.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1770 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 35 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 116 | °C | ASTM D648 |
| Vicat Softening Temperature | 155 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 230 | °C | |
| Mold Temperature | 20.0 - 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-403-M-G10 HF | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| TECHNO ALPHALOY MPA G101 | Techno Polymer Co, Ltd. | ABS+Nylon | TECHNO ALPHALOY |
| Nivionplast® A R356G NAT | SO.F.TER. SPA | Nylon 66 | Nivionplast® A |
| CALP WW175 | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| EMERGE™ PC/ABS 7800 | Trinseo | PC+ABS | EMERGE™ |
