Order Products : sales@su-jiao.com

Perfactory® E-Dent

Category:	Acrylic, Unspecified , Acrylic
Manufacturer:	EnvisionTEC, Inc.
Trademark:	Perfactory®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QTYwgd_Perfactory-E-Dent.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EnvisionTEC's E-Dent is a light-cured micro-hybrid filled dental crown and bridge material for long term temporaries for use on the Perfactory® High Productivity DDP machine. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin. E-Dent can also be used for printing of very tough veneers that are extremely accurate with a very fine surface finish. E-Dent is currently available in 3 shades A1, A2 and A3. Structures can be cut back and then layered using any light-curable shade composite. It is FDA approved. EnvisionTEC's E-Dent has been developed especially for the manufacturing of long term crown and bridge provisional. Full crowns or multi unit bridges can be printed. The printed design can also be cut back to allow for color layering and shading. Applications Dental Recommended Machines: PixCera, Perfactory® 4 DDP Series

Message

EnvisionTEC's E-Dent is a light-cured micro-hybrid filled dental crown and bridge material for long term temporaries for use on the Perfactory® High Productivity DDP machine. Provisionals are photo polymerized on a voxel-by-voxel basis (volumetric pixel) of the liquid resin. E-Dent can also be used for printing of very tough veneers that are extremely accurate with a very fine surface finish. E-Dent is currently available in 3 shades A1, A2 and A3. Structures can be cut back and then layered using any light-curable shade composite. It is FDA approved. EnvisionTEC's E-Dent has been developed especially for the manufacturing of long term crown and bridge provisional. Full crowns or multi unit bridges can be printed. The printed design can also be cut back to allow for color layering and shading.

Applications
Dental

Recommended Machines:
PixCera, Perfactory® 4 DDP Series

General Information
Filler / Reinforcement	Inorganic, 49% Filler by Weight, 30% Filler by Volume
Features	Filled Good Wear Resistance Outstanding Surface Finish Paintable Ultra High Toughness
Uses	Dental Applications
Agency Ratings	FDA Unspecified Rating
Appearance	Natural Color Off-White Opaque White
Forms	Liquid
Processing Method	3D Printing, Stereolithography

Physical	Nominal Value	Unit
Water Absorption	18.1	µm/mm³

Hardness	Nominal Value	Unit
Hardness - Vickers	25 HV

Mechanical	Nominal Value	Unit
Tensile Modulus	> 4400	MPa
Tensile Strength	30.0	MPa
Flexural Strength	> 90.0	MPa
Compressive Strength	> 250	MPa

Resin Grade	Manufacturer	Category	Trademark
RheTech Thermoplastic Polyolefin FT2500-594UV	RheTech, Inc.	Polyolefin, Unspecified	RheTech Thermoplastic Polyolefin
Monprene® MP-2150	Teknor Apex Company	TPE	Monprene®
Nylfor® R 66 CM/15 E8 UV GREY 7102	SO.F.TER. SPA	Nylon 66	Nylfor®
Pier One POM AH500TF4 NC010	Pier One Polymers, Inc.	Acetal (POM) Homopolymer	Pier One POM
ADLEN® G99BG-00	A.D. Compound S.p.A.	PP Copolymer	ADLEN®