Order Products : sales@su-jiao.com
RTP 4700 TFE 10
| Category: | PTT , Polytrimethylene Terephthalate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QPFU1t_RTP-4700-TFE-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 2.0 to 2.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2760 | MPa | ASTM D638 |
| Tensile Strength | 52.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Strength (Injection Molded) | 93.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 27 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 480 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 66.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 232 to 252 | °C | |
| Middle Temperature | 232 to 252 | °C | |
| Front Temperature | 232 to 252 | °C | |
| Mold Temperature | 88.0 to 121 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LDC 710 | Marco Polo International, Inc. | LDPE | MARPOL® |
| ULTEM™ CRS5201 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| Grilamid® LBV-65H FWA black 9225 | EMS-GRIVORY | Nylon 12 | Grilamid® |
| INEOS HDPE T50-500-196 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| Durethan® BKV 215 H2.0 901510 | LANXESS GmbH | Nylon Copolymer | Durethan® |
