Order Products : sales@su-jiao.com
Unipren® Elastomers D3 PRTA011 60A IG06S1 UP345
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Petropol Industry and Trade of Polymers LTDA |
| Trademark: | Unipren® Elastomers |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QNXGb7_Unipren-Elastomers-D3-PRTA011-60A-IG06S1-UP345.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoplastic elastomer (TPO), medium density that combines good physical and chemical properties with flexibility and easy of injection molding. The facilitiesof use allows a wide range of shapes, colors and designs, besides showing the characteristic of being thermoplastic and fully recyclable. Unipren® D is a soft elastomer, made from non-toxic |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 2.0 to 3.0 | % | ASTM D955 |
| Mooney Viscosity (ML 1+4, 121°C) | 37 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 to 77 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 1.90 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant | 8.50 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 9.10 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | > 650 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 41.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Rear Temperature | 145 | °C | |
| Middle Temperature | 150 | °C | |
| Front Temperature | 155 | °C | |
| Nozzle Temperature | 190 | °C | |
| Processing (Melt) Temp | 160 to 205 | °C | |
| Mold Temperature | 25.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBESTA 3020 GX12 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| HiFill® PA6/6 GF40 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Jackdaw PP ER34NT6552 | Jackdaw Polymers | PP, Unspecified | Jackdaw PP |
| Polybutene-1 PB 4235-1 Ivory | LyondellBasell Industries | PB | Polybutene-1 |
| OTECH PVC OW840 - Connector | OTECH Corporation | PVC, Unspecified | OTECH PVC |
