Vyncolit® E 264H Datasheet,Epoxy,Vyncolit N.V.-SHANGHAI SUSHENG

Message
Vyncolit E 264H is an epoxy; Epoxy resin material contains long glass fiber as filler. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is: resin transfer molding or compression molding. The main features of Vyncolit E 264H are: chemical resistance low viscosity Heat resistance Typical application areas include: Electrical/electronic applications food contact applications military applications

General Information
Filler / Reinforcement	Long glass fiber
Features	The degassing effect is low to no Low viscosity Solvent resistance Anti-salt water/fog Good thermal shock resistance Good chemical resistance alkali resistance acid resistance Non-corrosive
Uses	Electrical components Military application Connector
Agency Ratings	FDA not rated USDA Unspecified Approval
Forms	Particles
Processing Method	Resin transfer molding Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.89	g/cm³	ASTM D792
Bulk Factor	7.0		ASTM D1895
Molding Shrinkage - Flow (Transfer Molded)	0.10	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	105		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	103	MPa	ASTM D638
Flexural Modulus	24800	MPa	ASTM D790
Flexural Strength	269	MPa	ASTM D790
Compressive Strength	186	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	750	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	250	°C	ASTM D648
Thermal Conductivity	0.42	W/m/K	ASTM C177

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength			ASTM D149
-- ¹	13	kV/mm	ASTM D149
-- ²	12	kV/mm	ASTM D149
Dielectric Constant (1 MHz)	5.80		ASTM D150
Dissipation Factor (1 MHz)	0.017		ASTM D150
Arc Resistance	120	sec	ASTM D495

Injection instructions
Gauge: 0.3The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM F433.Water Absorption, ASTM D570, 48 hrs, 50°C: 0.15%Dielectric Strength, ASTM D149, 60 Hz, Method A, wet: 325 V/milDielectric Strength, ASTM D149, 60 Hz, Method A, dry: 375 V/milDielectric Strength, ASTM D149, 60 Hz, Method B, wet: 300 V/milDielectric Strength, ASTM D149, 60 Hz, Method B, dry: 325 V/milDielectric Constant, ASTM D150, 1000000 Hz, dry: 5.8Dissipation Factor, ASTM D150, 1000000 Hz, dry: 0.017Bulk Factor, ASTM D1895: 6 to 8Compression and Transfer Molding Conditions: Preheat Temperature: 200 to 225 °F Mold Temperature: 270 to 330 °F Compression Mold Pressure: 1000 to 8000 psi Transfer Mold Pressure: 2500 to 8000 psi Cure Time, 0.125 in: 150 to 300 sec

Injection instructions

Gauge: 0.3The value listed as Thermal Conductivity, ASTM C177, was tested in accordance with ASTM F433.Water Absorption, ASTM D570, 48 hrs, 50°C: 0.15%Dielectric Strength, ASTM D149, 60 Hz, Method A, wet: 325 V/milDielectric Strength, ASTM D149, 60 Hz, Method A, dry: 375 V/milDielectric Strength, ASTM D149, 60 Hz, Method B, wet: 300 V/milDielectric Strength, ASTM D149, 60 Hz, Method B, dry: 325 V/milDielectric Constant, ASTM D150, 1000000 Hz, dry: 5.8Dissipation Factor, ASTM D150, 1000000 Hz, dry: 0.017Bulk Factor, ASTM D1895: 6 to 8Compression and Transfer Molding Conditions: Preheat Temperature: 200 to 225 °F Mold Temperature: 270 to 330 °F Compression Mold Pressure: 1000 to 8000 psi Transfer Mold Pressure: 2500 to 8000 psi Cure Time, 0.125 in: 150 to 300 sec

Note Message
1 .	Method A (short time)
2 .	Method B (step by step)

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Vyncolit N.V.
Trademark:	Vyncolit®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QNQ5Td_Vyncolit-E-264H.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Nylfor® 74S5251PO 0001	SO.F.TER. SPA	Nylon 66	Nylfor®
Ferro PP NPP00GT17UL WHITE	Ferro Corporation	PP, Unspecified	Ferro PP
Polidan® T/A-LV	Solvay Specialty Polymers	XLPE	Polidan®
POLYCOMPO PE 5305E	POLYCOMPO Co.,Ltd.	HDPE	POLYCOMPO PE
RONFALIN® ABS 1361	A. Schulman Europe	ABS	RONFALIN®