Order Products : sales@su-jiao.com
Synres® PP G10 17
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Synres® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QNOh2O_Synres-PP-G10-17.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Synres®PP G10 17 is a polypropylene material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 76 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 50.8 mm) | 55.2 | MPa | ASTM D638 |
| Flexural Modulus | 2210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 69 | J/m | ASTM D256 |
| Dart Drop Impact | 10.8 | J | ASTM D5420 |
| Additional Information |
|---|
| Heat Deflection, 66 psi = 312 F (ASTM D-648)ASH = 10% (ASTM D-5630) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POPELEN HE-362M | Lotte Chemical Corporation | PP Impact Copolymer | POPELEN |
| Shinko-Lac® ABS SE-1 | Mitsubishi Rayon America Inc. | ABS | Shinko-Lac® |
| ELASTOSIL® R plus 4000/50 | Wacker Chemie AG | Silicone | ELASTOSIL® R plus |
| Elastron庐 G P.G101.A45.B | Elastron USA, Inc. | SEBS | Elastron® G |
| HiFill® PA6 GF13 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
