Order Products : sales@su-jiao.com
En Chuan 6129TA
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QKKEE2_En-Chuan-6129TA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is a thixotropic, pre-accelerated, non-waxed, isophthalic unsaturated polyester resin. It shows excellent performances in fishing boats, yachts, spray-up, hand lay-up, resin transfer moulding and vacuum bagging applications. It has outstanding characteristics of non sagging and dipping. This resin has obtained the DNV Type Approval Certificate. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 45 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | ASTM D790 | ||
| -- 2 | 3200 | MPa | ASTM D790 |
| -- 3 | 6860 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | ||
| -- 4 | 120 | MPa | ASTM D790 |
| -- 5 | 196 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 6(1.8 MPa, Unannealed) | 75.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Thixotropic Index (25°C) | 2.00 - 3.00 | ||
| Red Accelerator, CO-oct (CO 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.10 - 1.12 | g/cm³ | |
| Viscosity (25°C) | 0.20 - 0.70 | Pa·s | |
| Gel Time (25°C) | 12 - 22 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus | |||
| -- 7 | 3050 | MPa | |
| -- 8 | 8830 | MPa | |
| Tensile Strength | |||
| -- 9 | 85.3 | MPa | |
| -- 10 | 118 | MPa | |
| Tensile Elongation at Break | |||
| -- 11 | 2.0 | % | |
| -- 12 | 4.0 | % |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 , Unfilled |
| 2 . | Unfilled |
| 3 . | Filled |
| 4 . | Unfilled |
| 5 . | Filled |
| 6 . | Unfilled |
| 7 . | Unfilled |
| 8 . | Filled |
| 9 . | Unfilled |
| 10 . | Filled |
| 11 . | Filled |
| 12 . | Unfilled |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LHI211K | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Telcar® TL-1445W | Teknor Apex Company | TPE | Telcar® |
| SUPRAN® LFT PP 3240 | SAMBARK | PP, Unspecified | SUPRAN® LFT PP |
| Ebalta MG 454 / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| PENTAMID AB S GV60 H black | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
