Order Products : sales@su-jiao.com
LNP™ COLORCOMP™ M1000 compound
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | SABIC Innovative Plastics Europe |
| Trademark: | LNP™ COLORCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QINNmU_LNP-COLORCOMP-M1000-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP COLORCOMP M1000 is an unfilled Polypropylene resin. Also known as: LNP* COLORCOMP* Compound M1000 Product reorder name: M1000 |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 1.5 to 2.0 | % | Internal Method |
| Water Absorption (23°C, 24 hr) | 0.020 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield | 34.0 | MPa | |
| Break | 17.0 | MPa | |
| Tensile Strain | ISO 527-2/50 | ||
| Yield | 42 | % | |
| Break | 42 | % | |
| Flexural Modulus 1 | 1500 | MPa | ISO 178 |
| Flexural Stress | 44.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength 2(23°C) | 6.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 3(23°C) | 77 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 4 | |||
| 0.45 MPa, Unannealed, 64.0 mm Span | 96.0 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 64.0 mm Span | 59.0 | °C | ISO 75-2/Af |
| CLTE | ISO 11359-2 | ||
| Flow : 23 to 60°C | 1.1E-4 | cm/cm/°C | |
| Transverse : 23 to 60°C | 1.4E-4 | cm/cm/°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 193 to 204 | °C | |
| Middle Temperature | 199 to 210 | °C | |
| Front Temperature | 204 to 216 | °C | |
| Processing (Melt) Temp | 216 to 221 | °C | |
| Mold Temperature | 32.2 to 48.9 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® A3 GF 40 natural (1258) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Epocast 1628 A/B | Huntsman Advanced Materials | Epoxy | Epocast |
| Hylon® N7200HL | Ravago Manufacturing Americas, LLC | Nylon 6/12 | Hylon® |
| INSULCAST® RTVS Primer 41 | ITW Polymers Coatings North America | Silicone | INSULCAST® RTVS |
| Oleflex™ 6261-70A; 307105 | Vi-Chem Corporation | TPE | Oleflex™ |
