Order Products : sales@su-jiao.com
Halene P M325
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QGiXft_Halene-P-M325.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
M325 is a Heterophasic Polypropylene Impact Copolymer (PPiCP), produced by the latest generation Spheripol II Technology. This PPiCP is primarily suitable for Injection Molding & Compounding process. It is recommended for use in injection molding processes where high flow and medium impact strength are required. It is an ideal material for rigid packaging, automotive components, house wares and appliances parts. M325 combines excellent processability with high Flow, low Cycle Time, good Stiffness-Impact balance and good Gloss. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 7.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1150 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 60 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 84.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 140 | °C | ASTM D1525 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 210 | °C | |
| Middle Temperature | 180 to 210 | °C | |
| Front Temperature | 180 to 210 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NPC PE LL0220KJ | NPC Alliance Corporation | LLDPE | NPC PE |
| APICAL 100AV | Kaneka Corporation | Film, PI | APICAL |
| EVALENE® LLDPE LF20186 | JG Summit Petrochemical Corporation | LLDPE | EVALENE® LLDPE |
| Impet® 340R | Celanese Corporation | PET | Impet® |
| TECHNYL® C 218L V30 BLACK-J | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
