Category: | HDPE , High Density Polyethylene |
Manufacturer: | Witcom Engineering Plastics B.V. |
Trademark: | Witcom HDPE |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | QGgaFK_Witcom-HDPE-AS-S-UV.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
ATEX conform |
General Information | |
---|---|
Additive |
|
Features |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.990 | g/cm³ | ISO 1183 |
Molding Shrinkage - Flow (3.00 mm) | 1.5 - 2.5 | % | ISO 2577 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress (Yield) | < 15.0 | MPa | ISO 527-2 |
Tensile Strain (Break) | > 400 | % | ISO 527-2 |
Flexural Modulus | 800 | MPa | ISO 178 |
Flexural Stress | 18.0 | MPa | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact | 50 | kJ/m² | ISO 180/1A |
Unnotched Izod Impact Strength | No Break | ISO 180/1U |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Surface Resistivity | < 1.0E+9 | ohms | ASTM D257 |
Flammability | Nominal Value | Unit | Test Method |
---|---|---|---|
Flame Rating (3.00 mm) | HB | ISO 1210 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 80.0 | °C | |
Drying Time | 4.0 | hr | |
Suggested Max Moisture | 0.050 | % | |
Processing (Melt) Temp | 180 - 240 | °C | |
Mold Temperature | 20.0 - 60.0 | °C | |
Injection Rate | Fast | ||
Back Pressure | 0.00 - 1.00 | MPa |
Injection instructions |
---|
Screw speed: 0.1 - 0.25 m/sInjection pressure: Keep to a minimumHold pressure: Keep to a minimum |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 203 A HS | RTP Company | Nylon 6 | RTP |
RTP 1305 TFE 20 | RTP Company | PPS | RTP |
RTP 1000 TFE 20 FR A | RTP Company | PBT | RTP |
Fainplast PVC RKS 321 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
Keliren® XJ-HPN | Hangzhou Keli Chemical Co., Ltd. | CPE | Keliren® |