Order Products : sales@su-jiao.com
Generic PEI - Carbon Fiber
| Category: | PEI , Polyether Imide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QGeVYq_Generic-PEI---Carbon-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PEI - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.30 - 1.48 | g/cm³ | ASTM D792 |
| 23°C | 1.34 - 1.50 | g/cm³ | ISO 1183 |
| Molding Shrinkage | |||
| Flow : 23°C | 2.0E-3 - 0.25 | % | ASTM D955 |
| Transverse flow : 23°C | 0.39 - 0.41 | % | ASTM D955 |
| 23°C | 0.096 - 0.41 | % | ISO 294-4 |
| Water Absorption | |||
| 23°C, 24 hr | 0.11 - 0.20 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.20 - 0.29 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| 23°C | 7860 - 31200 | MPa | ASTM D638 |
| 23°C | 11700 - 35700 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Fracture, 23°C | 130 - 273 | MPa | ASTM D638 |
| Fracture, 23°C | 157 - 248 | MPa | ISO 527-2 |
| 23°C | 137 - 236 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Yield, 23°C | 1.5 - 5.1 | % | ASTM D638 |
| Yield, 23°C | 0.95 - 2.0 | % | ISO 527-2 |
| Fracture, 23°C | 0.94 - 5.1 | % | ASTM D638 |
| Fracture, 23°C | 0.90 - 2.1 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 5960 - 26600 | MPa | ASTM D790 |
| 23°C | 12000 - 30600 | MPa | ISO 178 |
| Flexural Strength | |||
| 23°C | 193 - 295 | MPa | ASTM D790 |
| 23°C | 206 - 390 | MPa | ISO 178 |
| Fracture, 23°C | 193 - 278 | MPa | ASTM D790 |
| Coefficient of Friction | 0.39 - 0.52 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 42 - 70 | J/m | ASTM D256 |
| 23°C | 5.3 - 7.1 | kJ/m² | ISO 180 |
| Unnotched Izod Impact | |||
| 23°C | 270 - 660 | J/m | ASTM D256 |
| 23°C | 18 - 45 | kJ/m² | ISO 180 |
| Instrumented Dart Impact (23°C) | 6.21 - 10.5 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, not annealed | 210 - 214 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 207 - 214 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 200 - 214 | °C | ISO 75-2/A |
| Linear thermal expansion coefficient | |||
| Flow | 2.7E-6 - 1.9E-5 | cm/cm/°C | ASTM E831 |
| Flow | 3.0E-6 - 2.7E-5 | cm/cm/°C | ISO 11359-2 |
| Lateral | 2.6E-5 - 4.0E-5 | cm/cm/°C | ASTM E831 |
| Lateral | 2.6E-5 - 6.0E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 4.5E+2 - 1.3E+10 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 1.0E+2 - 1.3E+10 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 150 | °C | |
| Drying Time | 3.9 - 5.1 | hr | |
| Dew Point | -28.9 | °C | |
| Rear Temperature | 340 - 390 | °C | |
| Middle Temperature | 359 - 390 | °C | |
| Front Temperature | 370 - 390 | °C | |
| Nozzle Temperature | 363 - 399 | °C | |
| Processing (Melt) Temp | 363 - 391 | °C | |
| Mold Temperature | 135 - 173 | °C | |
| Injection Pressure | 103 - 104 | MPa | |
| Back Pressure | 0.515 - 0.517 | MPa | |
| Screw Speed | 55 - 80 | rpm | |
| Vent Depth | 0.051 - 0.057 | mm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PEI - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silopren® LSR 2540 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| VITAMIDE® AR16RD6051 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
| Kotex KFN-30 | Kotec Corporation | PC | Kotex |
| K-vinyl 125 Deg C Rating Insulation (Auto) | Technovinyl Polymers India Ltd. | PVC, Unspecified | K-vinyl |
| TABOREN® PC 42 B 35-630 | SILON s.r.o. | PP Copolymer | TABOREN® |
